[Konvas] LUKA

[Pierre Samuel Rioux]

 Luka you said

*Magazine has nothing to do with it when camera has this issue that is it.*

Look the picture about the modification on the Mag.
>From my point of view over 40 frame sec the speed it's excessive and the
camera should be lube and in perfect top shape to run at 50 frames sec.

Look the picture carefully the small square ad are for the pin if the
magazine it's not perfectly in place the pin could touch the edge and there
you have problem with the stabilization.( camera became unbalance )
Worse imagine if the assistant using a no modified magazine.

PAINT THE MAGAZINE FOR THE PIN AN OTHER COLOR.

I see the Ostcam got some parts ad to it on the opposite side ... maybe the
easy way will be just changing all the mechanism with an other one from a
1m or a 2m but could be harder if they used a 8M body to made the Ostcam
they are a little different.

I have 13 X 200 ft magazine and I have 14 x 400 magazine and all of them
are look like new when i buy it, the magazine care it's very important on
the Cameflex CM 3 and the Konvas camera how using this type of magazine
because a part of the film movement was made in the magazine.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://konvas.org/pipermail/cinema_konvas.org/attachments/20170422/0dba9413/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Pin Modification on mag.jpg
Type: image/jpeg
Size: 48175 bytes
Desc: not available
URL: <http://konvas.org/pipermail/cinema_konvas.org/attachments/20170422/0dba9413/attachment.jpg>